Samsung: Not Draining
If the cycle ends with standing water, the washer is usually blocked, the pump is failing, or the drain path has an obstruction.
Learn more →Nearby appointments across Round Rock, TX. This symptom usually points to a real failure, not a setting.
No recent matching repair cases found for this issue in your area.
Many washers show the same symptom for different reasons — we identify the exact cause during the diagnostic.
If the cycle ends with standing water, the washer is usually blocked, the pump is failing, or the drain path has an obstruction.
Learn more →No-spin is often related to the lid/door lock system, a worn drive component, or an out-of-balance protection trigger.
Learn more →Noise can be caused by worn bearings, loose objects, failing suspension/shocks, or a drive component under load.
Learn more →A washer that won’t start is often caused by a door/lid lock issue, power problem, or a control failure — not always a bad motor.
Learn more →Meaning: Water Supply Error
Typical fix: Verify water supply, hoses, and inlet screens.
Meaning: Drain Error
Typical fix: Check drain filter/pump and hose for blockage.
Meaning: Unbalanced Load
Typical fix: Redistribute load; check leveling and suspension.
Most jobs fall into the $110-$219 labor range. The technician confirms the exact failure during the $39 diagnostic.
Some symptoms are safety-related. If you’re unsure, stop using the unit until a technician confirms the cause.
Yes — coverage includes 78664, 78665, 78681 and nearby areas.