Georgetown, TX · Samsung Range & Stove Repair · Error Code

Samsung Range & Stove Repair Error Code SE

If your Samsung range shows error code SE, it usually means: Keypad Error / Stuck Key. We’ll confirm the cause in Georgetown.

  • Appliance: Samsung Range & Stove
  • Meaning: Keypad Error / Stuck Key
  • Coverage: 78626, 78628, 78633

Recent Range & Stove Repair Repairs in Georgetown

Real recent repair cases. Prices shown are from past completed jobs.

Top verified matches for Samsung Range & Stove Repair code SE in Georgetown.

Austin • 2026-01-13VERIFIEDREPAIRED

Samsung • Model NX58H5600SS/AA

!
Symptom

Appliance type: Gas Oven Issue Type: Oven Not Heating / Igniter Failure Customer Complaint The customer reported that the oven was not heating and would not reach the set temperat…

🧪
Diagnosis

During diagnostics, the oven igniter was tested and found to have no electrical resistance, confirming igniter failure. Power supply from the control board to the igniter was present, indicating that…

✓
Fix / Resolution

Repair Solution The faulty oven igniter was replaced with a new compatible igniter. Post-Repair Testing After replacement: The igniter operated normally The oven ignited properly a

Local proof: Austin

Completion status: REPAIRED

See repair details →Service pageSamsung serviceBook $39 diagnostic →
Samsung Range / Stove repair photo
+ 2 more photos
Cedar Park • 2025-12-29VERIFIEDREPAIRED

Frigidaire • Model FFGF3011LBH

!
Symptom

The customer reported that the oven was not heating.

🧪
Diagnosis

During the diagnostic inspection, it was found that the oven igniter in the Frigidaire range had failed and was open (no continuity), preventing the oven from igniting and reaching the set temperatur…

✓
Fix / Resolution

The faulty oven igniter was replaced. After the replacement, the oven was fully tested and confirmed to heat properly. No additional issues were found. All labor and the installed

Local proof: Cedar Park

Completion status: REPAIRED

See repair details →Service pageFrigidaire serviceBook $39 diagnostic →
Frigidaire Range / Stove repair photo
+ 2 more photos

* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.

View all repair cases →

What error code SE means on a Samsung range & stove

Error code SE indicates Keypad Error / Stuck Key. This is a detected operating condition.

How technicians usually fix it

The exact fix depends on test results. We confirm the failed component/system during the diagnostic, then quote options.

Typical fix: Replace touch panel or control assembly.

Other Samsung error codes

Seeing a different code? These are other common Samsung range codes we handle in Georgetown.

Code E-08

Common Samsung range & stove problems

If this code doesn’t match your symptom, these are common issues we diagnose in Georgetown.

Burner Not WorkingOven Not Heating (Range)Gas Burner Clicking / Won’t Stop ClickingDisplay / Controls Not WorkingBurning Smell
Back to Samsung Range & Stove Repair →