Georgetown, TX · $39 Diagnostic · One verified pro

Samsung Range & Stove Repair in Georgetown, TX

We don’t guess on Samsung ranges in Georgetown. We test burners, heat output, then control.

Diagnostic drops to $39 as you complete the steps.
Typical repair time: 1-2 hours
Typical labor range: $129-$219
Coverage: 78626, 78628, 78633

Recent Samsung Range & Stove Repair Repairs in Georgetown

Real recent repair cases. Prices shown are from past completed jobs.

Top verified matches for Samsung Range & Stove Repair in Georgetown.

Austin • Jan 13, 2026VERIFIEDREPAIRED

SAMSUNG • Model NX58H5600SS/AA

$221

Parts + Labor

Issue

Appliance type: Gas Oven Issue Type: Oven Not Heating / Igniter Failure Customer Complaint The customer reported that the oven was not heating and would not reach the set temperature.

✓

Fix

Repair Solution The faulty oven igniter was replaced with a new compatible igniter. Post-Repair Testing After replacement: The igniter operated normally The oven ignited properly and began heating Temperature rise and cycling were verified Final Result The issue was fully resolved. The oven is now heating properly and operating as designed.

Parts:

View case →Book $39 diagnostic →

+ 2 more photos

Cedar Park • Dec 29, 2025VERIFIEDREPAIRED

FRIGIDAIRE • Model FFGF3011LBH

$239

Parts + Labor

Issue

The customer reported that the oven was not heating.

✓

Fix

The faulty oven igniter was replaced. After the replacement, the oven was fully tested and confirmed to heat properly. No additional issues were found. All labor and the installed part are covered by a 90-day warranty.

Parts:

View case →Book $39 diagnostic →

+ 2 more photos

* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.

Why choose GoFindTech for Samsung range & stove repair in Georgetown?

For gas ranges, ignition and gas safety checks matter — we confirm the root cause before replacement.

Common Samsung range & stove problems in Georgetown

Seeing a code in Georgetown? Book a diagnostic — we’ll validate the meaning and run the right checks.

Samsung: Burner Not Working

Burner failures usually come from igniters (gas), heating elements (electric), or the burner control/switch.

Test burner igniter spark/ignition (gas) or element resistance (electric)
Check burner switch / infinite switch operation
Inspect wiring, terminals, and connections for heat damage

Quick tip: For gas: clean the burner head and ports. For electric: ensure the element is seated firmly in the receptacle.

Learn more →

Samsung: Oven Not Heating (Range)

Range ovens share the same common failures as standalone ovens: weak elements/igniters, bad sensors, or control issues.

Test bake and broil elements (electric) or igniter amperage (gas)
Verify temperature sensor resistance and harness
Check thermal fuse / safety devices (if present)

Quick tip: Make sure the unit isn’t in Delay Start or Sabbath mode. If you smell gas, stop and book service.

Learn more →

Samsung: Gas Burner Clicking / Won’t Stop Clicking

Continuous clicking is often caused by moisture/grease on the igniter area or a failing ignition switch.

Inspect igniter electrode and burner cap alignment
Test ignition switch harness
Check spark module output and grounding

Quick tip: Dry the burner area thoroughly after cleaning. Moisture can keep the ignition circuit active.

Learn more →

Samsung: Display / Controls Not Working

A dead display is usually power-related, a failed control board, or a damaged harness connection.

Verify incoming power and terminal block condition
Check fuses/thermal cutoffs (if present)
Inspect control board and UI board connections

Quick tip: Check the breaker first. Some ranges use a 240V supply — a partial trip can cause odd behavior.

Learn more →

Samsung: Burning Smell

Burning smells can be normal for new units, but persistent odors often indicate overheating wiring, failing elements, or spilled grease burning.

Inspect bake element and insulation for hot spots
Check wiring terminals for heat damage
Verify fan operation (if convection/venting present)

Quick tip: If the smell is electrical (sharp/plastic), stop using the unit and book service.

Learn more →

Samsung range & stove error codes

Seeing a code in Georgetown? Book a diagnostic — we’ll validate the meaning and run the right checks.

Code SE Code E-08

Popular Samsung range & stove models we service

NX60A6511SS · Gas

Other Range & Stove Repair brands we service in Georgetown

Samsung Range & Stove Repair in nearby areas

Samsung Range & Stove Repair – Austin Samsung Range & Stove Repair – Cedar Park Samsung Range & Stove Repair – Round Rock Samsung Range & Stove Repair – Leander Samsung Range & Stove Repair – Pflugerville Samsung Range & Stove Repair – Bee Cave Samsung Range & Stove Repair – Lakeway Samsung Range & Stove Repair – Hutto

FAQ about Samsung range & stove repair in Georgetown

How much does Samsung range & stove repair cost?

Most jobs fall into the $129-$219 labor range. Parts priced separately after diagnostic.

Do you use OEM parts?

When available, yes. We also provide aftermarket options if cheaper.

Is it worth fixing older units?

The technician compares repair cost with age/condition and gives a clear recommendation.