Book in minutes in Austin. One technician, one clear diagnostic, and a straight answer.
Real recent repair cases. Prices shown are from past completed jobs.
Top verified matches for Samsung Washer Repair issue “Not Spinning” in Austin.
Appliance type: Top-Load Washing Machine Brand: LG Issue Type: Water Leak / Inlet Valve Failure Customer Complaint The customer reported that water was continuously dripping into the washer drum even when the washing machine was turned off and not in use.
The faulty water inlet valve assembly was removed and replaced with a new OEM-compatible inlet valve assembly. Post-Repair Testing After the replacement, the washer was tested thro
The customer reported that their top-load washer was not filling with enough water during the wash cycle. When the washer was loaded with a larger amount of laundry, the unit frequently went into an out-of-balance condition and failed to complete the cycle properly.
The technician replaced the worn suspension spring rods to restore proper tub stability and eliminate the out-of-balance condition. Additionally, the accelerometer (speed/load sens
* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.
If this started suddenly, it’s usually not user error. We verify the fault and recommend the most direct fix.
If the cycle ends with standing water, the washer is usually blocked, the pump is failing, or the drain path has an obstruction.
Learn more →Leaks can come from hoses, the pump, the tub seal, or the door boot (front-load). The source matters — we confirm it during the diagnostic.
Learn more →Noise can be caused by worn bearings, loose objects, failing suspension/shocks, or a drive component under load.
Learn more →A washer that won’t start is often caused by a door/lid lock issue, power problem, or a control failure — not always a bad motor.
Learn more →Meaning: Water Supply Error
Typical fix: Verify water supply, hoses, and inlet screens.
Meaning: Drain Error
Typical fix: Check drain filter/pump and hose for blockage.
Meaning: Unbalanced Load
Typical fix: Redistribute load; check leveling and suspension.
Most jobs fall into the $110-$219 labor range. The technician confirms the exact failure during the $39 diagnostic.
Some symptoms are safety-related. If you’re unsure, stop using the unit until a technician confirms the cause.
Yes — coverage includes 78701, 78702, 78703, 78704, 78705, 78745, 78758, 78759, 78729, 78748 and nearby areas.
