Round Rock, TX · LG Range & Stove Repair · Error Code

LG Range & Stove Repair Error Code F9

Serving 78664, 78665, 78681. Seeing F9? We’ll interpret it and run the right on-site checks.

  • Appliance: LG Range & Stove
  • Meaning: Heating Error (not reaching temp)
  • Coverage: 78664, 78665, 78681

Recent Range & Stove Repair Repairs in Round Rock

Real recent repair cases. Prices shown are from past completed jobs.

Top verified matches for LG Range & Stove Repair code F9 in Round Rock.

Cedar Park • 2025-12-29VERIFIEDREPAIRED

Frigidaire • Model FFGF3011LBH

!
Symptom

The customer reported that the oven was not heating.

🧪
Diagnosis

During the diagnostic inspection, it was found that the oven igniter in the Frigidaire range had failed and was open (no continuity), preventing the oven from igniting and reaching the set temperatur…

✓
Fix / Resolution

The faulty oven igniter was replaced. After the replacement, the oven was fully tested and confirmed to heat properly. No additional issues were found. All labor and the installed

Local proof: Cedar Park

Completion status: REPAIRED

See repair details →Service pageFrigidaire serviceBook $39 diagnostic →
Frigidaire Range / Stove repair photo
+ 2 more photos
Austin • 2026-01-13VERIFIEDREPAIRED

Samsung • Model NX58H5600SS/AA

!
Symptom

Appliance type: Gas Oven Issue Type: Oven Not Heating / Igniter Failure Customer Complaint The customer reported that the oven was not heating and would not reach the set temperat…

🧪
Diagnosis

During diagnostics, the oven igniter was tested and found to have no electrical resistance, confirming igniter failure. Power supply from the control board to the igniter was present, indicating that…

✓
Fix / Resolution

Repair Solution The faulty oven igniter was replaced with a new compatible igniter. Post-Repair Testing After replacement: The igniter operated normally The oven ignited properly a

Local proof: Austin

Completion status: REPAIRED

See repair details →Service pageSamsung serviceBook $39 diagnostic →
Samsung Range / Stove repair photo
+ 2 more photos

* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.

View all repair cases →

What error code F9 means on a LG range & stove

Error code F9 indicates Heating Error (not reaching temp). This is a detected operating condition.

How technicians usually fix it

The exact fix depends on test results. We confirm the failed component/system during the diagnostic, then quote options.

Typical fix: Test bake element/igniter; inspect control output.

Other LG error codes

Seeing a different code? These are other common LG range codes we handle in Round Rock.

Code F3

Common LG range & stove problems

If this code doesn’t match your symptom, these are common issues we diagnose in Round Rock.

Burner Not WorkingOven Not Heating (Range)Gas Burner Clicking / Won’t Stop ClickingDisplay / Controls Not WorkingBurning Smell
Back to LG Range & Stove Repair →