Pflugerville, TX · Samsung Range & Stove · $39 Diagnostic

Samsung Range Display Not Working in Pflugerville

Fast diagnosis in Pflugerville, TX. If it’s gas-related, safety comes first — we’ll advise whether to stop using it.

Typical repair time: 1-2 hours
Typical labor: $129-$219 (labor only)
Coverage: 78660, 78691

Recent Samsung Range & Stove Repair “Display / Controls Not Working” Repairs in Pflugerville

Real recent repair cases. Prices shown are from past completed jobs.

Top verified matches for Samsung Range & Stove Repair issue “Display / Controls Not Working” in Pflugerville.

Austin • Jan 13, 2026VERIFIEDREPAIRED

SAMSUNG • Model NX58H5600SS/AA

$221

Parts + Labor

Issue

Appliance type: Gas Oven Issue Type: Oven Not Heating / Igniter Failure Customer Complaint The customer reported that the oven was not heating and would not reach the set temperature.

✓

Fix

Repair Solution The faulty oven igniter was replaced with a new compatible igniter. Post-Repair Testing After replacement: The igniter operated normally The oven ignited properly and began heating Temperature rise and cycling were verified Final Result The issue was fully resolved. The oven is now heating properly and operating as designed.

Parts:

View case →Book $39 diagnostic →

+ 2 more photos

Cedar Park • Dec 29, 2025VERIFIEDREPAIRED

FRIGIDAIRE • Model FFGF3011LBH

$239

Parts + Labor

Issue

The customer reported that the oven was not heating.

✓

Fix

The faulty oven igniter was replaced. After the replacement, the oven was fully tested and confirmed to heat properly. No additional issues were found. All labor and the installed part are covered by a 90-day warranty.

Parts:

View case →Book $39 diagnostic →

+ 2 more photos

* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.

What it usually means when your Samsung range & stove is display / controls not working

A dead display is usually power-related, a failed control board, or a damaged harness connection.

What a technician checks on site

Verify incoming power and terminal block condition
Check fuses/thermal cutoffs (if present)
Inspect control board and UI board connections
Test control board outputs under load

Other Samsung range & stove issues we fix in Pflugerville

Samsung: Burner Not Working

Burner failures usually come from igniters (gas), heating elements (electric), or the burner control/switch.

Learn more →

Samsung: Oven Not Heating (Range)

Range ovens share the same common failures as standalone ovens: weak elements/igniters, bad sensors, or control issues.

Learn more →

Samsung: Gas Burner Clicking / Won’t Stop Clicking

Continuous clicking is often caused by moisture/grease on the igniter area or a failing ignition switch.

Learn more →

Samsung: Burning Smell

Burning smells can be normal for new units, but persistent odors often indicate overheating wiring, failing elements, or spilled grease burning.

Learn more →

Popular Samsung range & stove models we service

NX60A6511SS · Gas

Common Samsung range & stove error codes

Samsung code SE

Meaning: Keypad Error / Stuck Key

Typical fix: Replace touch panel or control assembly.

Samsung code E-08

Meaning: Temperature Sensor Error

Typical fix: Check/replace oven temperature sensor and wiring.

FAQ

How much does it cost to fix a Samsung Range & Stove that is display / controls not working in Pflugerville?

Most jobs fall into the $129-$219 labor range. The technician confirms the exact failure during the $39 diagnostic.

Is it safe to keep using a Samsung Range & Stove with this symptom?

Some symptoms are safety-related. If you’re unsure, stop using the unit until a technician confirms the cause.

Do you service Samsung Range & Stove units across Pflugerville, TX?

Yes — coverage includes 78660, 78691 and nearby areas.