Pflugerville, TX · GE Dryer · $39 Diagnostic

GE Dryer Takes Too Long to Dry

If your GE dryer has this symptom, we’ll confirm the failure fast and match you with one verified tech in Pflugerville.

Typical repair time: 1-2 hours
Typical labor: $110-$190 (labor only)
Coverage: 78660, 78691

Recent GE Dryer Repair “Takes Too Long to Dry” Repairs in Pflugerville

Real recent repair cases. Prices shown are from past completed jobs.

Top verified matches for GE Dryer Repair issue “Takes Too Long to Dry” in Pflugerville.

Austin • Dec 28, 2025VERIFIEDREPAIRED

SAMSUNG • Model DV42H5200EP

$249

Parts + Labor

Issue

The customer reported that the dryer was not heating and clothes were coming out cold and still damp after a full drying cycle.

✓

Fix

The inspection revealed a burned-out heating element, caused by restricted airflow and excessive heat buildup due to lint accumulation. Repair Performed Replaced the failed heating element Replaced all 4 temperature and safety sensors Performed a full vacuum cleaning of the internal cabinet Cleaned lint buildup from the dryer ventilation system After the repair, the dryer was tested and confirmed to be heating properly and operating within manufacturer specifications. Warranty for labor and parts - 90 days

Parts:

View case →Book $39 diagnostic →

+ 1 more photos

* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.

What it usually means when your GE dryer is takes too long to dry

This symptom typically indicates a failure in a specific system. We confirm it on-site with a clear diagnostic process.

What a technician checks on site

Measure airflow at the exterior vent
Clean Blower Wheel housing
Check moisture sensors
Inspect Cycling Thermostat

Other GE dryer issues we fix in Pflugerville

GE: Not Heating

If your dryer spins but the clothes come out damp and cold, you likely have a failure in the heating circuit.

Learn more →

GE: Making Loud Noise

Loud noises usually indicate mechanical wear on the drum support system. Ignore it, and the motor may burn out.

Learn more →

GE: Won't Start

A dead dryer is often caused by a simple safety switch failure, not a broken motor.

Learn more →

GE: Burning Smell

A burning smell usually means lint has accumulated near the heater, or the belt is melting due to friction.

Learn more →

Popular GE dryer models we service

We service many GE models — model number optional when booking.

Common GE dryer error codes

We diagnose GE codes — even rare or undocumented ones.

FAQ

How much does it cost to fix a GE Dryer that is takes too long to dry in Pflugerville?

Most jobs fall into the $110-$190 labor range. The technician confirms the exact failure during the $39 diagnostic.

Is it safe to keep using a GE Dryer with this symptom?

Some symptoms are safety-related. If you’re unsure, stop using the unit until a technician confirms the cause.

Do you service GE Dryer units across Pflugerville, TX?

Yes — coverage includes 78660, 78691 and nearby areas.