Home/Dryer Repair/Issue: Takes Too Long to Dry
Lakeway, TX · Dryer Repair · $39 Diagnostic

Your Dryer Takes Too Long to Dry

Same-day troubleshooting in Lakeway, TX. We confirm the failure and quote parts before repair.

  • Typical repair time: 1-2 hours
  • Typical labor: $110-$190 (labor only, parts extra)
  • Coverage: 78734

Recent Dryer Repair “Takes Too Long to Dry” Repairs in Lakeway

Real recent repair cases. Prices shown are from past completed jobs.

Top verified matches for Dryer Repair issue “Takes Too Long to Dry” in Lakeway.

Austin • Dec 28, 2025VERIFIEDREPAIRED

SAMSUNG • Model DV42H5200EP

$249
Parts + Labor
!
Issue

The customer reported that the dryer was not heating and clothes were coming out cold and still damp after a full drying cycle.

✓
Fix

The inspection revealed a burned-out heating element, caused by restricted airflow and excessive heat buildup due to lint accumulation. Repair Performed Replaced the failed heating element Replaced all 4 temperature and safety sensors Performed a full vacuum cleaning of the internal cabinet Cleaned lint buildup from the dryer ventilation system After the repair, the dryer was tested and confirmed to be heating properly and operating within manufacturer specifications. Warranty for labor and parts - 90 days

Parts:

Samsung Dryer repair photo
+ 1 more photos

* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.

What it usually means when your dryer is takes too long to dry

If the dryer gets hot but clothes stay wet, the moist air isn't escaping. This is a fire hazard.

What a technician checks on site

  • Measure airflow at the exterior vent
  • Clean Blower Wheel housing
  • Check moisture sensors
  • Inspect Cycling Thermostat

Other dryer problems we fix in Lakeway

If this symptom doesn’t match exactly, check these common issues we see in Lakeway, TX.

Not Heating

If your dryer spins but the clothes come out damp and cold, you likely have a failure in the heating circuit.

Learn more →

Making Loud Noise

Loud noises usually indicate mechanical wear on the drum support system. Ignore it, and the motor may burn out.

Learn more →

Won't Start

A dead dryer is often caused by a simple safety switch failure, not a broken motor.

Learn more →

Burning Smell

A burning smell usually means lint has accumulated near the heater, or the belt is melting due to friction.

Learn more →

Not sure if this is your issue?

You can also start from the main Dryer Repair in Lakeway page and describe what you’re seeing — our technician will classify the failure during the diagnostic.

Go to Dryer Repair in Lakeway →