This is a common Whirlpool range complaint we diagnose in Georgetown, TX. Book online — diagnostic drops to $39.
Real recent repair cases. Prices shown are from past completed jobs.
Top verified matches for Whirlpool Range & Stove Repair issue “Oven Not Heating (Range)” in Georgetown.
The customer reported that the oven was not heating.
The faulty oven igniter was replaced. After the replacement, the oven was fully tested and confirmed to heat properly. No additional issues were found. All labor and the installed part are covered by a 90-day warranty.
Parts:
Appliance type: Gas Oven Issue Type: Oven Not Heating / Igniter Failure Customer Complaint The customer reported that the oven was not heating and would not reach the set temperature.
Repair Solution The faulty oven igniter was replaced with a new compatible igniter. Post-Repair Testing After replacement: The igniter operated normally The oven ignited properly and began heating Temperature rise and cycling were verified Final Result The issue was fully resolved. The oven is now heating properly and operating as designed.
Parts:
* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.
This complaint often has 2–3 common root causes. We test them in a logical order.
Burner failures usually come from igniters (gas), heating elements (electric), or the burner control/switch.
Learn more →Continuous clicking is often caused by moisture/grease on the igniter area or a failing ignition switch.
Learn more →A dead display is usually power-related, a failed control board, or a damaged harness connection.
Learn more →Burning smells can be normal for new units, but persistent odors often indicate overheating wiring, failing elements, or spilled grease burning.
Learn more →Meaning: Control Board / EEPROM Error
Typical fix: Reset power; if persists, replace control board.
Meaning: Temperature Sensor Problem
Typical fix: Replace sensor; verify harness continuity.
Most jobs fall into the $129-$219 labor range. The technician confirms the exact failure during the $39 diagnostic.
Some symptoms are safety-related. If you’re unsure, stop using the unit until a technician confirms the cause.
Yes — coverage includes 78626, 78628, 78633 and nearby areas.
