Nearby appointments across Cedar Park, TX. This symptom usually points to a real burner/heating/control issue.
Real recent repair cases. Prices shown are from past completed jobs.
Top verified matches for LG Range & Stove Repair issue “Gas Burner Clicking / Won’t Stop Clicking” in Cedar Park.
The customer reported that the oven was not heating.
The faulty oven igniter was replaced. After the replacement, the oven was fully tested and confirmed to heat properly. No additional issues were found. All labor and the installed part are covered by a 90-day warranty.
Parts:
Appliance type: Gas Oven Issue Type: Oven Not Heating / Igniter Failure Customer Complaint The customer reported that the oven was not heating and would not reach the set temperature.
Repair Solution The faulty oven igniter was replaced with a new compatible igniter. Post-Repair Testing After replacement: The igniter operated normally The oven ignited properly and began heating Temperature rise and cycling were verified Final Result The issue was fully resolved. The oven is now heating properly and operating as designed.
Parts:
* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.
This complaint often has 2–3 common root causes. We test them in a logical order.
Burner failures usually come from igniters (gas), heating elements (electric), or the burner control/switch.
Learn more →Range ovens share the same common failures as standalone ovens: weak elements/igniters, bad sensors, or control issues.
Learn more →A dead display is usually power-related, a failed control board, or a damaged harness connection.
Learn more →Burning smells can be normal for new units, but persistent odors often indicate overheating wiring, failing elements, or spilled grease burning.
Learn more →Meaning: Oven Temperature Sensor Error
Typical fix: Replace temperature sensor or repair harness.
Meaning: Heating Error (not reaching temp)
Typical fix: Test bake element/igniter; inspect control output.
Most jobs fall into the $129-$219 labor range. The technician confirms the exact failure during the $39 diagnostic.
Some symptoms are safety-related. If you’re unsure, stop using the unit until a technician confirms the cause.
Yes — coverage includes 78613, 78630 and nearby areas.
