Austin, TX · GE Range & Stove Repair · Error Code

GE Range & Stove Repair Error Code F2

GE range error code F2 repair near me in Austin, TX. One verified technician, clear diagnosis.

  • Appliance: GE Range & Stove
  • Meaning: Over-Temperature Condition
  • Coverage: 78701, 78702, 78703, 78704, 78705, 78745, 78758, 78759, 78729, 78748

Recent Range & Stove Repair Repairs in Austin

Real recent repair cases. Prices shown are from past completed jobs.

Top verified matches for GE Range & Stove Repair code F2 in Austin.

Austin • 2026-01-13VERIFIEDREPAIRED

Samsung • Model NX58H5600SS/AA

!
Symptom

Appliance type: Gas Oven Issue Type: Oven Not Heating / Igniter Failure Customer Complaint The customer reported that the oven was not heating and would not reach the set temperat…

🧪
Diagnosis

During diagnostics, the oven igniter was tested and found to have no electrical resistance, confirming igniter failure. Power supply from the control board to the igniter was present, indicating that…

✓
Fix / Resolution

Repair Solution The faulty oven igniter was replaced with a new compatible igniter. Post-Repair Testing After replacement: The igniter operated normally The oven ignited properly a

Local proof: Austin

Completion status: REPAIRED

See repair details →Service pageSamsung serviceBook $39 diagnostic →
Samsung Range / Stove repair photo
+ 2 more photos
Cedar Park • 2025-12-29VERIFIEDREPAIRED

Frigidaire • Model FFGF3011LBH

!
Symptom

The customer reported that the oven was not heating.

🧪
Diagnosis

During the diagnostic inspection, it was found that the oven igniter in the Frigidaire range had failed and was open (no continuity), preventing the oven from igniting and reaching the set temperatur…

✓
Fix / Resolution

The faulty oven igniter was replaced. After the replacement, the oven was fully tested and confirmed to heat properly. No additional issues were found. All labor and the installed

Local proof: Cedar Park

Completion status: REPAIRED

See repair details →Service pageFrigidaire serviceBook $39 diagnostic →
Frigidaire Range / Stove repair photo
+ 2 more photos

* Prices shown are from past completed jobs and include parts and labor. Actual repair cost varies by model, diagnosis, and part availability.

View all repair cases →

What error code F2 means on a GE range & stove

Codes are helpful clues, but we still verify the exact failure on-site before replacing parts.

How technicians usually fix it

A code narrows the diagnosis, but we still validate the condition before replacement — no guessing.

Typical fix: Test sensor; inspect control for runaway heat.

Common GE range & stove problems

If this code doesn’t match your symptom, these are common issues we diagnose in Austin.

Burner Not WorkingOven Not Heating (Range)Gas Burner Clicking / Won’t Stop ClickingDisplay / Controls Not WorkingBurning Smell
Back to GE Range & Stove Repair →