Samsung Dryer Repair Error Code HE

The customer reported that the dryer was not heating and clothes were coming out cold and still damp after a full drying cycle.

During the diagnostic visit, the technician performed a full inspection of the dryer. Power supply was tested at the terminal block and confirmed to be within normal range. Airflow was checked while…

The inspection revealed a burned-out heating element, caused by restricted airflow and excessive heat buildup due to lint accumulation. Repair Performed Replaced the failed heating

Local proof: Austin

Completion status: REPAIRED

The customer reported a high-pitched rubbing noise coming from the dryer.

The technician found that one of the drum rollers was seized and partially worn, while another roller was also stuck. Additionally, an improperly adjusted foot on the stacked washer-dryer unit caused…

The technician replaced four drum rollers with bushings, the pulley, and the belt. The internal cabinet was cleaned of lint, and the feet were adjusted for stability.

Local proof: South Austin · 78704 · Near South Lamar

Completion status: REPAIRED

A homeowner in the Leander area reported that the dryer is making a sound when it starts and then sounds like it has a pair of shoes in the machine.

During the diagnostic, the technician found that the drum rollers were worn out.

The repair included the replacement of all 4 drum rollers with bushings, the pulley, and the belt.

Local proof: Leander · 78641 · Near Crystal Falls Pkwy

Completion status: REPAIRED

The dryer is not coming on.

The pin on the high limit thermostat was found torn off, preventing the dryer from functioning.

The technician replaced the high limit thermostat. After the repair, the unit was tested and no further issues were discovered.

Local proof: Cedar Park · 78613 · Near Lake Line

Completion status: REPAIRED